Need to Measure Pulp Yield in Standing Trees?

for the past 10 years we have been developing Near Infra Red spectroscopic models to predict kraft pulp yield in small eucalypt wood samples... in an affordable manner. 

HomeNIR Spectroscopy

NIR Spectroscopy

The Value Proposition

Growing eucalypts for pulp depends on growing merchantable volume as quickly as possible.  The mass of pulp produced from each unit area of forest depends on

  • Merchantable volume,
  • Wood density
  • Pulp yield

Pulp yield is the proportion of biomass that remains at the end of the pulping process. 

For a pulp mill processing 4 million green tonnes of wood per year, an increase in Kraft pulp yield (KPY) of 1% equates to ~20,000 tonnes of extra pulp for no additional growing or processing costs.

Unlike volume and density, KPY has been slow and expensive to measure.  Consequently both forest growers and pulp manufacturers have had limited opportunity to include it in managing their value chain. 

Times have changed

 

Low cost Pulp Yield assessment

Near Infra Red (NIR) spectroscopy is widely used in agriculture and manufacturing. Application to KPY measurement  spans two decades of R&D, demonstrating its ability to provide precise measurements of KPY in samples as small as 0.5 gm. 

Numerous studies have shown NIR offers

  • Low cost measurement
  • Expanded application of traditional analyses
  • Efficient ranking of trees and sites
  • Precise KPY values that are highly heritable

NIR can be used to measure a range of commercially valuable wood properties

  •  Pulp Yield 
  •  Density 
  •  Dry Matter content 
  •  Stiffness 
  •  Microfibril Angle

The biggest issue is trusting the values that NIR measurement generates.  Consequently any application of NIR requires a means of quality control until such time as the user has confidence that the values are precise.  This can only occur through repeated experience.

The development of NIR calibrations is therefore an iterative process.  Cycles of development and validation are required until precise and accurate predictions are consistently obtained.  This process applies to both the type of NIR application being developed and the individual wood property being measured.

Near Infra Red spectroscopy is a multi-variate statistical approach to obtain qualitative and/or quantitative information about the properties of an organic substance based on its absorption of light in the near infra red range (typically 1000 – 2500 nm)

Go to top